ZANKER ZKF680ITXB Instrukcja Użytkownika Pobierz pdf (Strona 20)

Control knob

Symbol Description

no gas supply / off position

Symbol Description

ignition position / maximum gas

supply

minimum gas supply

Daily use

Warning! Refer to Safety chapters.

Burner overview

A

B

D

C

C

D

A

B

A. Burner cap

B. Burner crown

C. Ignition candle

D. Thermocouple

Ignition of the burner

Always light the burner before you put on

the cookware.

Warning! Be very careful when you use

open fire in the kitchen environment. The

manufacturer declines any responsibility

in case of the flame misuse.

1. Push the control knob down and turn it

counterclockwise to the maximum gas supply

position (

).

2. Keep the control knob pushed for equal or less

than 10 seconds. This lets the thermocouple warm

up. If not, the gas supply is interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does not

light, check if the crown and its cap are

in correct positions.

Warning! Do not keep the control knob

pushed for more than 15 seconds. If the

burner does not light after 15 seconds,

release the control knob, turn it into off

position and try to light the burner again

after minimum 1 minute.

Caution! In the absence of electricity

you can ignite the burner without

electrical device; in this case approach

the burner with a flame, turn the control

knob counter-clockwise to maximum gas

supply position and push it down. Keep

the control knob pushed for equal or less

than 10 seconds to let the thermocouple

warm up.

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag